Skip to main content
Omron S8VK-C24024

Omron S8VK-C24024 Power Supply, 240 W, 24 V DC, 10 A

MPN S8VK-C24024

Omron S8VK-C series, S8VK-C24024, 240 W switched-mode power supply, 24 V DC 10 A output, single-phase 100–240 VAC input, DIN-rail mount, screw terminals.

$47.12 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

S8VK-C24024 key specifications
ParameterValue
SeriesS8VK-C
Output signalAdjustable
Product typeBook Type
Terminal typeScrew Terminal
Input voltage240 V
Supply voltage100 V
Insulation voltage ui3000 V
Current32 A
Output current10 A
Output power240 W
Frequency63 Hz
IP ratingIP20

All specifications

S8VK-C24024 additional specifications
ParameterValue
MountingDIN Rail
Temp storage max65 °C
Temp storage min25 °C
Temp operating max60 °C
Temp operating min25 °C
Humidity max20%
Depth150.114 mm
Width59.944 mm
Height129.794 mm
Mtbf hours270000 h
Efficiency87%
I/O channels1
Ripple noise0.15 V
Output branches count1

Product details

The Omron S8VK-C24024 is a 240 W switched-mode power supply that converts a single-phase 100–240 VAC input to a regulated 24 V DC output at 10 A. It's built for DIN-rail mounting in control cabinets, with screw terminals for field wiring. The 24 V DC rail is the standard control voltage for PLCs, sensors, relays, and HMI panels — this unit powers that bus. With 240 W on tap, it can handle a mixed load of several amps of digital I/O plus a modest analog loop supply. Efficiency peaks at 87 %, which keeps heat dissipation manageable inside a sealed panel. The MTBF of 270,000 hours (roughly 30 years continuous) is a solid reliability figure for a critical-spare application — one in the cabinet, one on the shelf.

Input accepts 85–264 VAC, 47–63 Hz, covering global line voltages without a tap change. That single-phase input means it's suited for standard North American 120 V or European 230 V branch circuits — no three-phase feed needed. Output voltage is adjustable, so you can trim the 24 V rail up or down a few percent to compensate for voltage drop in long cable runs to remote I/O nodes. The 0.15 V ripple and noise figure is tight enough for sensitive analog inputs — no external post-filter required for most applications. Storage temperature range of –25 to 65°C covers most warehouse and shipping conditions.

The approvals list — CE, cRUus, CSA C22.2 No. 107.1/62368-1, EN55011 Class A, EN61204-3, EN62368-1, EN62477-1, UL Listed, UL508/62368-1 — covers North American and European installations, so it drops into panels destined for either market without a compliance re-spin.

DIN-rail mount, book-type format — 60 mm wide, 125 mm tall, 140 mm deep. The screw terminals accept 20–10 AWG, so you can land 2.5 mm² stranded for the DC output without a ferrule, though a ferrule is recommended for stranded wire in vibration environments. The green DC OK indicator gives a quick visual that the output is within spec — useful during commissioning or fault isolation. No fieldbus or remote monitoring on this unit; it's a straightforward power supply, not a managed PSU.

MPN
S8VK-C24024