It operates on a 24V DC supply and terminates in an M8 connector with a 2.5-meter cable, making it a direct-fit replacement for Festo-specified sensor points on pneumatic actuators, grippers, and linear slides.
The M8 connector and 2.5-meter cable are the key mechanical fit parameters: the M8 threaded barrel matches standard sensor mounting holes on Festo cylinders and valve terminals, while the 2.5m cable length gives enough slack for routing inside a control cabinet or along a machine frame without a junction box. The PNP normally-open output (PS in the code) is the common sinking configuration for most PLC inputs — verify your input card's polarity before wiring.