Skip to main content
Log in
Festo SMEO-1-S-LED-24-B — Proximity Sensors

Festo SMEO-1-S-LED-24-B Proximity Sensor, Magnetic Reed, 24

MPNSMEO-1-S-LED-24-B

Festo B series magnetic reed proximity sensor, SMEO-1-S-LED-24-B, 24 V DC, M8 3-pin connector, IP67, 1 A max output, LED status display.

$20.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SMEO-1-S-LED-24-B — Identification
ParameterValue
SeriesB series
TypePROXIMITY SENSOR
SMEO-1-S-LED-24-B — Output
ParameterValue
Switching outputNormally open
SMEO-1-S-LED-24-B — Other specifications
ParameterValue
ModelSMEO-1-S-LED-24-B
Weight20 g
ConditionNew / Used
Shelf no.200105
Connector typeM8 Connector, 3-pin
IP ratingIP67
Operating voltage24 V DC
Measuring principleMagnetic reed
Output current max.1 A
Switching capacity max.27 W
Diameter, housing length15.5 x 15 x 34 mm
Switching status displayLED
Ambient operating temperature-20 … 70°C

Product details

The Festo SMEO-1-S-LED-24-B is a magnetic reed proximity sensor from the B series, built for cylinder position sensing in pneumatic actuators. It runs on 24 V DC with a normally open switching output, rated for 1 A continuous and a maximum switching capacity of 27 W. The M8 3-pin connector makes it a quick plug-in replacement on Festo T-slot cylinders, and the IP67 rating means it'll survive washdown and dusty plant-floor conditions without a second thought. The LED status display gives you a visual confirmation of the switch state at a glance — handy when you're trouble-shooting a line that's down and don't want to chase a meter.

Frequently asked questions

What are the key ratings of the SMEO-1-S-LED-24-B?

It's a magnetic reed proximity sensor operating at 24 V DC, with a normally open switching output rated for 1 A and 27 W maximum switching capacity. It has an IP67 enclosure rating and an M8 3-pin connector.

Will the SMEO-1-S-LED-24-B drop into a panel specified around the SMEO-1-LED-24?

The SMEO-1-S-LED-24-B uses an M8 3-pin connector, while the SMEO-1-LED-24 uses a 2.5 m cable. It also runs on 24 V DC only, compared to the 12–27 V AC/DC range of the peer. You'd need to check the wiring interface and voltage compatibility before swapping.

MPN
SMEO-1-S-LED-24-B