Skip to main content
Omron D4E1D20N

D4E1D20N Limit Switch, Sealed Roller Plunger, 1NC+1NO, IP67

MPN D4E1D20N

Omron D4E Series limit switch, D4E1D20N, sealed roller plunger actuator, 1NC+1NO contacts, IP67, 5 A switching current.

$56.46 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

D4E1D20N specifications
ParameterValue
SeriesD4E Series
ActuationSealed Roller Plunger
Insulation voltage ui250 V
IP ratingIP67

Product details

The D4E1D20N is a limit switch from Omron's D4E Series, built around a sealed roller plunger actuator. It gives you one normally-closed and one normally-open contact set in a single housing, rated to switch 5 A on both AC and DC circuits. The sealed roller plunger means the actuator is a spring-loaded pin with a small roller on top, enclosed in a way that keeps contaminants out. With an IP67 rating, the switch body and actuator seal against dust ingress and temporary immersion — it handles washdown environments and wet plant floors without failing.

The 5 A switching current at 250 V AC covers most control-circuit loads — contactors, relays, solenoid valves — but it is not a power-switching device. The DC side is rated at 5 A at only 14 V, which is a hard constraint: if your circuit runs 24 VDC at any significant current, the contacts will arc and fail. That 14 V DC rating is the maximum voltage at the full 5 A; for higher DC voltages you must derate the current, and the datasheet curve governs that. The 11.77 N operating force is firm enough to resist false trips from vibration but light enough that a cam or machine slide can actuate it without stalling. Screw terminals simplify field wiring — no special crimp tool needed, just strip and torque.

Because the D4E Series is a mature line, the supply is stable but not ramping.

MPN
D4E1D20N