Skip to main content
Omron F3SJ-A0395P20

Omron F3SJ-A0395P20 Light Curtain, 20mm Detection, 395mm Hei

MPN F3SJ-A0395P20
End of Life

Omron F3SJ-A series safety light curtain, F3SJ-A0395P20, 20mm finger/hand detection, 395mm protective height, 15mm beam pitch, 26 beams, 0.2-9.0m range, IP65, 24VDC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A0395P20 specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

What this light curtain covers

The Omron F3SJ-A0395P20 is a 20 mm detection-capability safety light curtain from the F3SJ-A series, rated for finger and hand protection. Its 15 mm beam pitch and 26 beams create a 395 mm protective height — sized for guarding a single-axis hazard zone like a press or pick-and-place cell entry point. Detection capability of 20 mm means it catches fingers reaching into the hazard zone (finger-protection class per IEC 61496-1). The 0.2 m to 9.0 m operating range gives flexibility for both tight machine guarding and wider access areas. IP65 rating means the sensor housing and optics withstand washdown — suitable for food-and-bev lines or wet machining environments where dust and water spray are present. Built-in blanking and muting functions let the curtain ignore fixed obstructions (like a conveyor frame) and automatically bypass during a material pass-through cycle, which is common in automated assembly cells.

Integration notes

Runs on 24 VDC supply, standard for safety relay and PLC-based safety circuits. The 26-beam array draws loop power consistent with the F3SJ-A series; plan for a dedicated 24 VDC supply rail in the panel to avoid brownout on the safety loop. IP65 enclosure means the emitter and receiver heads can be surface-mounted on machine frames without additional guarding, but cable glands and connector orientation matter for washdown compliance — verify the gland entry is oriented downward to avoid pooling.

MPN
F3SJ-A0395P20