Skip to main content
Omron F3SJ-A1260P25-TS

Omron F3SJ-A1260P25-TS Safety Light Curtain, 25mm, 1260mm

MPN F3SJ-A1260P25-TS
End of Life

Omron F3SJ-A series safety light curtain, F3SJ-A1260P25-TS, hand protection, 25mm detection capability, 1260mm protective height, 63 beams at 20mm pitch, 0.2m–9.0m range, IP65, 24VDC, blanking and muting function.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A1260P25-TS specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

The Omron F3SJ-A1260P25-TS is a type-4 safety light curtain from the F3SJ-A series, rated for hand protection with a 25 mm detection capability. That 25 mm figure means it catches a hand or finger reaching into the hazard zone — not just a full arm — so it meets the finger-protection class per IEC 61496 for point-of-operation guarding on presses, assembly stations, and packaging machines. The protective height spans 1260 mm, delivered by 63 beams at a 20 mm pitch. The operating range stretches from 0.2 m out to 9.0 m, which covers most reach-in guarding distances on a production line without needing a secondary set of emitters.

Blanking and muting — what that buys you

This unit carries blanking and muting function onboard. Blanking lets you disable specific beams so a fixed fixture or workpiece can pass through the curtain without tripping the safety output — useful on a conveyor where a product carrier breaks the beam intentionally. Muting temporarily suspends the safety function during a non-hazardous part of the cycle, like when a pallet enters a robot cell under slow speed. Both features are configurable, not hardwired, so you can adjust them per application without swapping optics.

Integration notes

Mounting this on a machine frame or stand: the 1260 mm protective height and 63-beam array mean the emitter and receiver columns need alignment within the specified tolerance. The IP65 rating lets you hose it down, but the M12 connectors (standard on the F3SJ-A series) should be oriented downward or capped to avoid pooling. The blanking and muting logic is set via the controller, not dip switches on the bar, so plan for a teach pendant or software connection during commissioning.

MPN
F3SJ-A1260P25-TS