Skip to main content
Omron R88D-1SN02H-ECT

Omron R88D-1SN02H-ECT 1S Servo Drive, 200 W, EtherCAT, 230 V

MPN R88D-1SN02H-ECT

Omron 1S series servo drive, R88D-1SN02H-ECT, 200 W, single-phase 230 VAC, EtherCAT communications, IP20, built-in Safe Torque Off.

$270.18 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

R88D-1SN02H-ECT specifications
ParameterValue
Series1 S
Supply voltage230 V
Current2.7 A
Power200 W
IP ratingIP20
ProtocolEtherCAT communications
Temp operating max55 °C
Temp operating min0 °C
Width40 mm
Height180 mm
Length0.185 m
Servo control methodEtherCAT

Product details

The Omron R88D-1SN02H-ECT is a 200 W servo drive from the 1S series, fed by single-phase 230 VAC (170–252 V range) and communicating over EtherCAT. It drives a matching 200 W rotary servo motor — typically the R88M-1M20030(H/T) frame — with a 23-bit absolute encoder for position loops that settle without overshoot. Rated current is 2.7 A, and the drive carries built-in Safe Torque Off (STO) rated PLd (EN ISO 13849-1) and SIL2 (IEC 61508) over the network, plus a hardwired STO channel. That means the safety function lives inside the drive — no external safety relay needed for the stop circuit.

The drive measures 40 mm wide, 180 mm tall, and 185 mm deep — a slim footprint that fits standard 35 mm DIN-rail or panel-mount layouts. IP20 rating means it belongs inside a cabinet, not on the machine frame. All connectors are screw-less push-in type; I/O and the motor brake relay are pluggable for pre-wiring and swap-out without re-terminating the harness. Operating temperature range is 0 °C to 55 °C, so derate if the cabinet ambient runs above that. The single-phase input draws from L and N; no third-phase wiring to worry about, which simplifies panel layout for smaller machines.

200 W rated power matches a 200 W servo motor — pairing a larger motor would overload the drive output stage. The 2.7 A rated current is the continuous output limit; short-term peak current during acceleration is higher but thermally limited by the drive's I²t algorithm. Single-phase 230 VAC input means the drive cannot run on three-phase supply without a step-down transformer or phase converter. Verify your line voltage is within 170–252 VAC before committing the BOM line.

MPN
R88D-1SN02H-ECT