AJ65SBTB1-16TE - Mitsubishi Electric
MPNAJ65SBTB1-16TE
CC-Link small type remote I / O unit (transistor output, terminal block) AJ65SBTB1 - 16TE
$184.00 – $522.20Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Station type | Remote I / O station |
| Withstand voltage | Between DC external terminal and ground: AC 500 V for 1 minute |
| Rated load voltage | DC12 / 24V |
| Over voltage category | II or less |
| Used load voltage range | DC 10.2 to 26.4 V (ripple ratio within 5%) |
| Unit power supply voltage | DC 20.4 to 26.4 V (ripple ratio within 5%) |
| Maximum voltage drop during ON | DC 0.1 V or less (TYP.) 0.1 A, DC 0.2 V or less (MAX.) 0.1 A |
| Output section external power supply voltage | DC 10.2 to 26.4 V (ripple ratio within 5%) |
| Current | 50 mA or less (24 VDC, all points ON) |
| Maximum load current | 0.1 A / 1 point, 1.6 A / 1 common |
| Leakage current at OFF | 0.1 mA or less |
| Maximum inrush current | 1.0 A less than 10 ms |
All specifications
| Parameter | Value |
|---|---|
| Installation location | In the control panel |
| External wiring connection method | Communication unit, Unit power supply unit: 7 points 2-piece terminal block (M3 screw) I / O power supply unit, input / output unit: 18 points Direct mounting terminal block (M3 screw) |
| Output response time OFF → ON | 0.5ms or less |
| Storage ambient temperature | -20 to 75 ° C |
| Operating ambient temperature | 0 to 55 ° C |
| Pollution degree | 2 or less |
| Surge suppressor | Zener diode |
| Storage ambient humidity | 10 to 90% RH, non condensing |
| Ambient operating humidity | 10 to 90% RH, non condensing |
| When there is continuous vibration | Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2 |
| Depth | 40 mm |
| Width | 118 mm |
| Shipping weight | 1.2 Kg |
| External dimensions height | 50 mm |
| Mass | 0.18 Kg |
| ON → OFF | 1.5 ms or less (resistance load) |
| Manufacturer | Mitsubishi Electric |
| Output format | Transistor output (source type) |
| Use elevation | 0 to 2000 m |
| Use atmosphere | No corrosive gas |
| Impact resistance | Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions) |
| Estimated lead time | Usually ships in 1 - 10 working days. |
| Protection function | Overload protection function, overheat protection function |
| Output common method | 16 points 1 common (terminal trapezoid 1 wire type) |
| Insulation resistance | DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more |
| Number of output points | 16 points |
| Output isolation method | Photocoupler isolation |
| Number of occupied stations | 1 station |
MPN
AJ65SBTB1-16TE