Skip to main content
Log in
Mitsubishi Electric AJ65SBTB32-8DT — Digital Output Modules

Mitsubishi AJ65SBTB32-8DT Remote I/O, 4I/4O, 24VDC

MPNAJ65SBTB32-8DT

Mitsubishi AJ65SBTB32-8DT remote I/O station, DC input (plus common type), transistor output (sink type), 4 points each, 24 VDC, 1 station occupation.

$165.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

AJ65SBTB32-8DT key specifications
ParameterValue
Station typeRemote I / O station
Withstand voltageBetween DC external terminal and ground: AC 500 V for 1 minute
Rated load voltageDC 24V
Rated input voltageDC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)
Over voltage categoryII or less
ON voltage (ON current)14 V or more / 3.5 mA or more
Used load voltage rangeDC 19.2 to 26.4 V (ripple ratio within 5%)
OFF voltage (OFF current)6 V or less / 1.7 mA or less
Unit power supply voltageDC 20.4 to 26.4 V (ripple ratio within 5%)
Maximum voltage drop during ONDC 0.3 V or less (TYP.) 0.5 A, DC 0.6 V or less (MAX.) 0.5 A
Output section external power supply voltageDC 19.2 to 26.4 V (ripple ratio within 5%)
Current45 mA or less (24 VDC, all points ON)

All specifications

AJ65SBTB32-8DT additional specifications
ParameterValue
Rated input currentAbout 7 mA
Maximum load current0.5 A / 1 point, 1.2 A / 1 common
Leakage current at OFF0.25 mA or less
Maximum inrush current1.0 A less than 10 ms
Installation locationIn the control panel
External wiring connection methodCommunication unit, Unit power supply unit: 7 points 2-piece terminal block (M3 screw) I / O power supply unit, input / output unit: 18 points Direct mounting terminal block (M3 screw)
Input response time OFF → ON1.5 ms or less (24 VDC)
Output response time OFF → ON0.5ms or less
Storage ambient temperature-20 to 75 ° C
Operating ambient temperature0 to 55 ° C
Pollution degree2 or less
Storage ambient humidity10 to 90% RH, non condensing
Ambient operating humidity10 to 90% RH, non condensing
When there is continuous vibrationFrequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2
Depth40 mm
Width118 mm
Shipping weight1.2 Kg
External dimensions height50 mm
Mass0.18 Kg
ON → OFF1.5 ms or less (resistance load)
Input formatDC input (plus common type)
Common method8 points / common (Input: terminal trapezoidal 3 wire type, output: terminal trapezoid 2 wire type)
Output formatTransistor output (sink type)
Use elevation0 to 2000 m
Use atmosphereNo corrosive gas
Input resistanceAbout 3.3 kΩ
Protection gradeIP2X
Impact resistanceMeets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)
Estimated lead timeUsually ships in 1 - 10 working days.
Protection functionOverload protection function, overvoltage protection function, overheat protection function
Insulation resistanceDC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more
Input isolation methodPhotocoupler isolation
Number of input points4 points
Number of output points4 points
Output isolation methodPhotocoupler isolation
Number of occupied stations1 station
Maximum number of simultaneous input points100%

Product details

Your I/O slice on the CC-Link bus

The AJ65SBTB32-8DT is a compact remote I/O station serving 4 DC inputs and 4 transistor-sink outputs on a CC-Link network. It draws 45 mA or less from the 24 VDC bus when all points are ON, which leaves headroom on a standard supply. Inputs are DC plus-common type, optically isolated, with an ON threshold of 14 V at 3.5 mA. Outputs are sink-type transistors rated for 0.5 A per point and 1.2 A per common, and they carry built-in overload, overvoltage, and overheat protection — so you can skip external fusing on most low-current loads. The unit occupies one station on the CC-Link bus and uses trapezoidal terminal blocks: 3-wire type for inputs, 2-wire for outputs. Panel-mount inside a control panel, IP2X, with a width of 118 mm and depth of 40 mm — fits a standard DIN rail slot.

MPN
AJ65SBTB32-8DT