Skip to main content
Log in
Mitsubishi Electric AJ65VBTCE3-16D — PLC I/O & Expansion Modules

Mitsubishi AJ65VBTCE3-16D CC-Link Remote I/O, 16 DC Inputs,

MPNAJ65VBTCE3-16D

Mitsubishi Electric CC-Link remote I/O unit, 16 DC inputs (e-CON), 24 VDC, 35 mA, 0.10 kg, AJ65VBTCE3-16D.

$266.00 – $544.39Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

AJ65VBTCE3-16D key specifications
ParameterValue
Station typeRemote I / O station
Input common type16 points 1 common (Sensor connector (e - CON) type 3 wire type)
Withstand voltageBetween DC external terminal and ground: AC 500 V for 1 minute
Rated input voltageDC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)
Over voltage categoryII or less
ON voltage (ON current)14 V or more / 3.5 mA or more
OFF voltage (OFF current)6 V or less / 1.7 mA or less
Unit power supply voltageDC 20.4 to 26.4 V (ripple ratio within 5%)
Current35 mA or less (24 VDC, all points ON)
Rated input currentAbout 5 mA
Communication cableVer.1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL 200PSBH, CS-110
Installation locationIn the control panel

All specifications

AJ65VBTCE3-16D additional specifications
ParameterValue
External wiring connection methodCommunication unit: One-touch connector for communication (sold separately) Unit power supply unit, I / O power supply unit: Power supply . FG one-touch connector (sold separately) Input / output unit: sensor connector (e-CON)
Input response time OFF → ON1.5 ms or less (24 VDC)
Storage ambient temperature-20 to 75 ° C
Operating ambient temperature0 to 55 ° C
Pollution degree2 or less
Storage ambient humidity10 to 90% RH, non condensing
Ambient operating humidity10 to 90% RH, non condensing
When there is continuous vibrationFrequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2
Depth45.5 mm
Width100 mm
Shipping weight1.1 Kg
External dimensions height50 mm
Mass0.10 Kg
ON → OFF1.5 ms or less (24 VDC)
Input formatDC input (plus common type)
Use elevation0 to 2000 m
Use atmosphereNo corrosive gas
Input resistanceAbout 4.7 kΩ
Protection gradeIP 1 XB
Impact resistanceMeets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)
Estimated lead timeUsually ships in 1 - 10 working days.
Insulation resistanceDC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 MΩ or more
Input isolation methodPhotocoupler isolation
Number of input points16 points
Number of occupied stations1 station
Maximum number of simultaneous input points100% (when mounted on the front), see the derating chart except when front mounted

Product details

The AJ65VBTCE3-16D is a CC-Link remote I/O station supplying 16 DC inputs via sensor-connector (e-CON) format. It sits on the CC-Link network as a single-station slave, drawing 35 mA or less from the 24 VDC bus when all points are ON. The input circuits are photocoupler-isolated, rated 24 VDC with a 14 V ON threshold and 3.5 mA ON current; off-threshold is 6 V, 1.7 mA. Response time is 1.5 ms or less from OFF to ON and ON to OFF.

Integration Note

Mount within a control panel rated for pollution degree 2 or less, at an elevation up to 2000 m. The unit withstands 500 VAC between terminals and ground for 1 minute and meets JIS B 3502 / IEC 61131-2 for impact (147 m/s² three times per axis). Storage temperature range –20 to +75 °C; operating range 0–55 °C.

MPN
AJ65VBTCE3-16D