The Mitsubishi FR-D720S-008-NA is a motor drive from the FR-D700 series, rated at 0.8 A and 1/8 HP on single-phase 200 V input, built to the US/CA/MX Specification. This is the smallest current rating in the D720S family — sized for fractional-horsepower loads like small pumps, fans, or conveyors where single-phase supply is the only option. The 0.8 A figure is the drive's rated output current; match it to the motor's full-load amps, not the nameplate horsepower alone, because the drive's thermal capacity governs continuous duty.
Single-phase 200 V input means this drive connects to a standard North American 200 V single-phase line (often derived from a 200/208 V three-phase service using one phase and neutral). The output is three-phase PWM to the motor, so the motor must be a three-phase induction motor rated for the drive's output voltage. At 0.8 A output, the drive suits a 1/8 HP motor at 200 V; if the motor draws more than 0.8 A at full load, step up to the next D720S frame. The US/CA/MX design tag confirms the drive meets North American electrical codes and is factory-configured for 60 Hz operation, not 50 Hz — check the parameter settings if the motor nameplate lists 50 Hz.