Mitsubishi FR-D700 series, FR-D740-036-, 3.6 A / 2 HP, 400 V three-phase, Special Version.
| Parameter | Value |
|---|---|
| Weight | 0.00 kgs |
| Parameter | Value |
|---|---|
| Design | Special Version |
| Rated current (HP) | 3.6 Amp, 2 HP |
| Voltage class (Phases) | Three-phase, 400 V |
The FR-D740-036-E8: The FR-D740-036- is a 400 V three-phase drive from the FR-D700 series, rated 3.6 A / 2 HP. This is a Special Version variant.
At 3.6 A / 2 HP on 400 V three-phase, this drive fits a standard induction motor. The FR-D700 series uses a compact frame with a built-in keypad and potentiometer.
The 'Special Version' designation indicates a non-standard factory configuration — typically a custom parameter set, restricted parameter access, or a tailored firmware version for a specific OEM or application. The exact differences from the standard FR-D740-036 must be confirmed from the Mitsubishi order code breakdown or the factory specification sheet for this variant.
No. The FR-D740 series uses a smaller, different mounting footprint and a different terminal layout than the FR-A740 series. The FR-A740-00025-NA is a larger-frame drive with additional I/O and option slots. Panel cutouts, wiring, and control wiring would all need to be reworked. If you need a drop-in replacement for an FR-A740-00025-NA, stay within the FR-A740 family.
The evidence does not list specific compliance marks (RoHS, REACH, UL, IEC) for this order code. Mitsubishi FR-D700 series drives typically carry CE and UL/cUL marks, but for this Special Version variant, confirm the exact certification status with the factory or your distributor before specifying for a regulated installation.