Mitsubishi FR-E840-0380-4-60, Inverter FR-E800, 400 V class three-phase, ND rated current 0380, current production.
| Parameter | Value |
|---|---|
| 4 | 400 V class |
| -4 | Monitoring/protocol specifications : Voltage (terminal AM)Rated frequency (initial setting) : 50 HzInput signal (initial status) : Source logicSafety stop signal : Source logic (fixed) |
| -60 | Circuit board coating : With coatingPlated conductor : Without plated conductors |
| 0380 | Inverter ND rated current (A) |
| None | Three-phase input |
| Weight | 11 Kg |
| Product type | Inverter FR-E800 |
| Plated conductor | Without plated conductors |
| Safety stop signal | Source logic (fixed) |
| Circuit board coating | With coating |
| Input signal (initial status) | Source logic |
| Rated frequency (initial setting) | 50 Hz |
| Monitoring (protocol specifications) | Voltage (terminal AM) |
The FR-E840-0380-4-60: Initial monitoring and protocol setup are straightforward: voltage feedback via terminal AM, 50 Hz default frequency, and source logic for input and safety stop. That's a standard configuration for line integration — no surprises at commissioning.
Circuit board coating is included; plated conductors are not. Rated frequency defaults to 50 Hz; safety stop is fixed source logic.
It is the ND rated current code, indicating the drive's continuous output current capacity under normal duty. It is the primary specification for matching to the motor load.
Monitoring outputs voltage at terminal AM. The factory-set rated frequency is 50 Hz, and both the input signal and safety stop signal are configured for source logic (fixed). These are adjustable through parameters but the default matches many standard installations.
No related articles