Mitsubishi FX2N-8EYT, output expansion block, 8-point transistor sink output, rated 0.5 A/point resistive load, 0.2 kg mass, EOL-end-of-life status.
| Parameter | Value |
|---|---|
| Output type (format) | Transistor / sink output |
| ON voltage | 1.5V or less |
| Voltage | Internal power supply from the sequencer |
| Withstand voltage | Between the output terminal (transistor) of the expansion output block and the earth terminal: AC 500 V for 1 minute |
| Open-circuit leakage current | 0.1 mA / DC 30 V |
| External power supply | DC 5V to 30V |
| Frequency | 57 to 150 Hz : Acceleration: 9.8 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2 |
| Direct installation frequency | 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2 |
| Anti-vibration when DIN rail is installed frequency | 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2 |
| Output connection shape | Vertical terminal block (M3 screw) |
| Response time OFF → ON | 0.2 ms or less / 200 mA (24 VDC) |
| Operating temperature | 0 to 55 ° C. ... Operating -25 to 75 ° C. ..... Save |
| Parameter | Value |
|---|---|
| Use altitude | Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down. |
| Relative humidity | 5 to 95% RH (noncondensing).... in operation |
| Shipping weight | 1.2 Kg |
| Mass | 0.2 Kg |
| ON → OFF | 0.2 ms or less / 200 mA (24 VDC) |
| Inductive load | 12 W / DC 24 V |
| Noise immunity | Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si |
| Use atmosphere | There is no corrosive property, flammable gas, conductive dust (dust) is not serious |
| Impact resistance | 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2 |
| Circuit insulation | Photocoupler insulation |
| Estimated lead time | Usually ships in 1 - 10 working days. |
| Application sequencer | FX1N, FX3G, FX2N, FX3U, FX1NC, FX3GC, FX2NC, FX3UCFX2NC - CNV - IF is required for connection to FX1NC and FX2NC. To connect to FX3GC, FX3UC, FX2NC - CNV - IF or FX3UC - 1PS - 5V is required. |
| Insulation resistance | Between the output terminal (transistor) and the earth terminal of the expansion output block: 5 MΩ or more with DC 500 V insulation resistance meter |
| Number of output points | 8 points |
| Maximum load resistive load | The total load current per 0.5 A / point common should be as follows. . Output 4 points / common: 0.8 A or less . Output 8 points / common: 1.6 A or less |
| Output operation indication | LED on the panel when driving the photo coupler |
The FX2N-8EYT: Each output point handles 0.5 A resistive load maximum, with total per common limited to 0.8 A for 4-point commons and 1.6 A for 8-point commons. Response time is 0.2 ms or less at 200 mA / 24 VDC. The block meets IEC 61131-2 vibration: 57 to 150 Hz at 9.8 m/s² acceleration. Operating temperature range is 0 to 55 °C, storage -25 to 75 °C. It cannot be used above 2000 m altitude or in atmospheres with conductive dust.
The unit mass is 0.2 kg.
It meets IEC 61131-2: 57 to 150 Hz at 9.8 m/s² acceleration, applied 10 times in each axis.
No. The FX2N-8EYT is an expansion block that connects via a flat cable to an FX2N CPU, while the FX2N-48MR-DS is a standalone CPU base unit with built-in I/O. They serve different functions and physical form factors.
No related articles