FX3U-4AD-PT-ADP
MPNFX3U-4AD-PT-ADP
Analog input adapter for Pt 100 type temperature sensor FX 3 U - 4 AD - PT - ADP
$172.00 – $276.86Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Withstand voltage | Between all terminals and ground terminal: 500 VAC for 1 minute |
| Power supply | DC 5 V 15 mA (internal power supply from the sequencer) DC 24 V + 20% -15% 50 mA (external power supply) |
| Frequency | 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total) |
| Direct installation frequency | 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total) |
| Anti-vibration when DIN rail is installed frequency | 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) |
| Operating temperature | 0 to 55 ° C. ... Operating -25 to 75 ° C. ..... Save |
| Rated temperature range | -50 ° C to + 250 ° C (-58 ° F to + 482 ° F) |
| Use altitude | Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down. |
| Relative humidity | 5 to 95% RH (noncondensing).... in operation |
| Shipping weight | 1 Kg |
| Mass | 0.1 Kg |
| Ground | Class D grounding (grounding resistance: 100 Ω or less)Grounding should be dedicated ground or common ground. |
All specifications
| Parameter | Value |
|---|---|
| Resolution | 0.1 ° C (0.18 ° F) |
| Manufacturer | Mitsubishi Electric |
| Control method | Depending on the sequence program |
| Digital output | -500 to + 2500 (-580 to + 4820 ) Within parentheses, the digital value at Fahrenheit setting |
| Noise immunity | Noise voltage with 1,000 Vp-p, noise width 1 μs, rising 1 ns, with noise si |
| Use atmosphere | There is no corrosive property, flammable gas, conductive dust (dust) is not serious |
| Overall accuracy | Ambient temperature 25 ° C ± 5 ° C: ± 0.5% with full scale Ambient temperature 0 ° C to 55 ° C: ± 1.0% with full scale |
| Impact resistance | 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse |
| Insulation method | . Isolation between analog input part and sequencer by photo coupler . Insulation between analog input part and power supply by DC / DC converter . No isolation between each channel |
| Estimated lead time | 1 - 10 Working Days |
| Application sequencer | FX3S, FX3G, FX3U, FX3GC, FX3UC (FX3UC - 32MT - LT is Ver.1.30 or later) FX3S - CNV - ADP is required for connection to FX3S. For connection to FX 3 G, FX 3 G - CNV - ADP is required. To connect to FX3U and FX3UC - 32MT - LT (-2), a function expansion board is required. |
| Insulation resistance | Between all terminals and ground terminal: 500 MV DC 500 MΩ or more with an insulation resistance meter |
| Number of input channels | 4 channels |
| FX3S / FX3G / FX3GC sequencer | 250 μs (Data update every calculation cycle) |
| Number of occupied i (O points) | 0 point (It does not relate to the maximum input / output point number of the sequencer) |
| Conversion speed FX3U / FX3UC PLC | 200 μs (Data update every calculation cycle) |
| Temperature sensor . temperature control input signal | Platinum resistance temperature detector 3 wire type Pt 100 JIS C 1604 - 1997 |
MPN
FX3U-4AD-PT-ADP