The GS2107-WTBD-N is an Advanced Operator Terminal with a 7-inch TFT display running at 800 x 480 dots resolution and 65536 colors. It uses an analog resistive film touch panel — the same proven technology that works reliably with gloved hands or in dusty environments. Power supply is 24 VDC (+10%, -15%), drawing 6.5 W (271 mA at 24 V) typical, or 3.8 W (158 mA) with the backlight off. The front panel is rated IP65F, so it withstands washdown in food or light industrial environments.
Interfaces and connectivity
Built-in Ethernet (100BASE-TX / 10BASE-T, RJ-45), RS-232 (D-Sub 9-pin male), RS-422 (D-Sub 9-pin female with fixed 330 Ω termination), USB Full Speed (Mini-B), and an SD card slot (SDHC compatible). That covers both legacy controller links and modern network drops without needing an expansion module.
Memory and project storage
Internal flash memory (9 MB) stores project data and the OS, rated for 100,000 write cycles. The SD card slot handles project data read/write and logging data save, so you can push updates or pull logs without a PC.