The Mitsubishi GT1030-HBD2 is a 4.5-inch STN monochrome touch screen HMI from the GT10 GOT1000 series, running on 24 VDC and communicating over RS-232. At 288 x 96 pixels, this is a compact operator interface sized for small machine panels where you need basic status, alarm pages, and numeric entry — not a full-color dashboard. The monochrome high-contrast display (green/red/orange backlight) is readable in most factory light conditions, and the 4.5-inch form factor fits a panel cutout of 137 x 66 mm.
The GT1030-HBD2 carries a mature lifecycle status — meaning it is not in active new-product introduction but remains in the Mitsubishi catalog for existing installed bases. If you are supporting a line built around the GT10 GOT1000 series, this is the direct replacement part.
Mounts into a 137 x 66 mm panel cutout (horizontal format), with external dimensions of 145 x 76 x 29.5 mm excluding mounting fixtures. The RS-232 port is the sole PLC interface — no Ethernet, no USB host on this variant. Power is 24 VDC, so verify your cabinet supply is clean and within tolerance. The STN display is not a sunlight-readable TFT; keep it out of direct glare if operators need to read it at a glance.