The GT2510-VTBD is a Mitsubishi GOT2000 Series GT25 mid-range HMI — 10.4" TFT color VGA display, 24 VDC powered, black bezel. It draws 10 W standalone (6 W with backlight off) and fits inside a control panel with clamp terminals for M3 screw wiring, accepting 0.75 to 2 mm² stranded wire. The 24 VDC input tolerates +25%/-20%, so it holds through a sagging bus down to about 19 V.
Key Ratings & Fit
The 10.4" VGA (640 × 480) TFT is the workhorse size for operator panels on compact machines — readable from a few meters, but not a wide-format SCADA screen. Inrush current peaks at 5 A for 20 ms at 25 °C, so a standard 24 VDC supply with 10 A headroom handles the start-up without nuisance tripping. The 350 VAC withstand between power terminals and ground (for 1 minute) confirms basic insulation integrity for panel installation per overvoltage category II.
Installation Environment
Rated for 0 to 55 °C operating ambient, 10 to 90% RH non-condensing, and pollution degree 2 — typical for a ventilated control cabinet. Storage range extends from -20 to 60 °C. No corrosive gas, conductive dust, or direct sunlight exposure allowed. Mount inside the panel only; self-cooled, no fan to fail.