The 100-240VAC input with a permissible instantaneous failure time of 20 ms at 100VAC or more means this HMI rides through brief line sags without a brownout reset — important on lines fed from shared transformer taps. Operating ambient temp is 0 to 55°C, storage down to -20°C; the 55°C ceiling is the panel interior temperature, not the plant floor, so factor in enclosure heating if the panel runs warm. Clamp terminals accept 0.75 to 2 mm² wire; torque the terminal screws to 0.5-0.8 N·m.
Mitsubishi GT2510-VTWA GT25 HMI, 10.4" VGA, 100-240VAC
MPNGT2510-VTWA
Mitsubishi GOT2000 Series GT25, GT2510-VTWA, 10.4" TFT VGA HMI, 100-240VAC, white frame, 12 W stand-alone.
$1,809.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Display type | T = TFT Color |
Product details
Frequently asked questions
What are the key power ratings for this HMI?
Input power supply is 100-240VAC (+10%, -15%). Stand-alone consumption is 12 W; with backlight off it draws 7 W. Maximum load (including expansion units) is 34 W or less. Inrush current is 60 A or less for 2 ms at 25°C.
What environmental conditions does it tolerate?
Operating ambient temperature is 0 to 55°C; storage -20°C to 60°C. Humidity 10-90% RH non-condensing. Pollution degree 2, overvoltage category II. Rated for installation inside a control panel, free of greasy fumes, corrosive gas, flammable gas, and excessive conductive dust.
Will the GT2510-VTWA drop into a panel specified around an FX5U-32MT/DS-TS CPU module?
No — the FX5U-32MT/DS-TS is a PLC CPU module, not an HMI. They serve different functions and have different mounting footprints, power supplies, and wiring. The GT2510-VTWA connects to the FX5U via Ethernet or serial as a separate panel-mount device, not as a direct replacement.
MPN
GT2510-VTWA