Mitsubishi LD75P series, Programmable Controller (positioning), LD75P2-CM, 2 axes, 200K pulses/s max output, 600 data/axis, open-collector pulse train, 2m max connection distance.
| Parameter | Value |
|---|---|
| Product type | Programmable Controller |
| Positioning data | 600 data/axis |
| Max. output pulses | 200K pulses/s |
| Number of control axes | 2 axis |
| Max. connection distance | 2m |
The LD75P2-CM: The LD75P4-CM is the 4-axis sibling with the same pulse rate and cable length—choose it if your machine requires four independent or coordinated axes. The LD75P1-CM is the single-axis variant, identical otherwise. For runs longer than 2m or higher speed, the LD75D2-CM uses differential line drive rated at 4M pulses/s and 10m distance; note the D series needs a differential-capable drive and changes the wiring scheme on the connector.
It is a 2-axis pulse-train positioning controller with 200K pulses/s max output, 600 data points per axis, and a maximum connection distance of 2 meters.
For 4 axes use the LD75P4-CM (same output type and distance). For differential line drive offering 4M pulses/s and 10m distance, use the LD75D2-CM.