The Mitsubishi MR-JE-10A+HG-KN13J-S100 is a matched servo amplifier and AC servo motor set from the MR-JE series, paired with a low-inertia HG-KN motor. Rated output is 0.1 kW at 3000 r/min, making it sized for small-axis positioning, pick-and-place, or light conveyor indexing where the load inertia stays low and the cycle demands quick acceleration.
The 0.1 kW output and 3000 r/min rated speed define the torque-speed envelope: at rated speed the motor delivers roughly 0.32 N·m continuous. The HG-KN motor carries a low-inertia rotor, so it responds fast to position commands — useful for short-stroke moves where settling time matters more than raw torque. The J suffix in the motor code means the shaft includes an oil seal, protecting the bearing from splash or mist in gearbox-adjacent mounts or light machining environments. No separate oil seal kit needed. The amplifier uses a general-purpose interface — pulse-train position command, analog speed/torque, or simple I/O. No dedicated motion-network module required; a standard PLC with a pulse output card or analog output drives it.