The Mitsubishi Q10UDEHCPU is a Q-series CPU module that executes the control program via stored program iteration. Program capacity runs to 100K steps (400K bytes) — enough for a mid-size machine or process line. Timer points default to 2048 (T0–2047), counters to 1024 (C0–1023), and data registers to 12288 (D0–12287). Communication is configurable full duplex or half duplex over the baseband transmission.
Mitsubishi Q10UDEHCPU Q-Series CPU, 100K Steps, 0.22 kg
MPNQ10UDEHCPU
Mitsubishi Q-Series CPU, Q10UDEHCPU, programmable logic controller, 100K steps program capacity, 0.22 kg.
$2,312.00 – $4,838.76Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Over voltage category | II or less |
| DC 5 v internal current consumption | 0.49 A |
| Latch (power outage hold) range | L 0 to 8191 (default 8192 points) [latch range can be set for B, F, V, T, ST, C, D, W] |
| Allowable momentary power failure time | Depends on power supply unit |
| Communication mode | Full duplex / half duplex |
| High speed communication area between multiple CPUs | 32 KB |
| Installation location | In the control panel |
| Number of connections | Socket communication, MELSOFT connection, MC protocol total 16 pieces 1 for FTP |
| Storage ambient temperature | -25 to 75 ° C (-20 to 75 ° C when system includes AnS / A series unit) |
| Operating ambient temperature | 0 to 55 ° C |
| Pollution degree | 2 or less |
| Storage ambient humidity | 5 to 95% RH, non condensing (10 to 90% RH when the system includes AnS / A series unit) |
All specifications
| Parameter | Value |
|---|---|
| Ambient operating humidity | 5 to 95% RH, non condensing (10 to 90% RH when the system includes AnS / A series unit) |
| When there is continuous vibration | Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2 |
| Depth | 115 mm |
| Width | 27.4 mm |
| Shipping weight | 1.2 Kg |
| External dimensions height | 98 mm |
| Standard RAM | 4 |
| Standard ROM | 256 |
| Standard RAM (Drive 3) | 1024 KB |
| Standard ROM (Drive 4) | 2048 KB |
| File register [R] standard RAM | 32768 points (R 0 ~ 32767) Up to 524288 points can be used by block switching |
| File register [ZR] standard RAM | 524288 points (ZR 0 to 524287) No block switching required |
| CPU shared memory QCPU standard area | 8 KB |
| Mass | 0.22 Kg |
| Refresh | 2048 pieces |
| ATA card | 511 books |
| Timer [T] | Default 2048 points (T0 to 2047) (Shared by low-speed timer / high-speed timer) (Changeable) Low-speed timer / high- speed timer specified by instruction Low-speed timer / high-speed timer measurement unit is set by parameter (low-speed timer: 1 to 1000 ms, 1 ms increment, default 100 ms) (High-speed timer: 0.1 to 100.0 ms, 0.1 ms increments, default 10.0 ms) |
| Counter [C] | Normal counter: default 1024 points (C 0 ~ 1023) (changeable) |
| MOV d 0 d 1 | 19 ns |
| Pointer [P] | 4096 points (P 0 ~ 4095) (Number of device points fixed) Use range of local pointer / common pointer can be set by parameter |
| Device class | Class I |
| Constant scan | 0.5 - 2000 ms (Can be set in 0.5 ms increments) |
| Use elevation | 0 to 2000 m |
| Clock function | Year, month, day, hour, minute, second, day of the week (leap year automatic discrimination) accuracy: -2.96 ~ + 3.74s (. TYP + 1.42s) / d at 0 °C accuracy: -3.18 ~ + 3.74s (TYP + . 1.50 s) / d at 25 ° C. Accuracy: -13.20 to +2.12 s (TYP. -3.54 s) / d at 55 ° C. |
| Control method | Stored program iteration operation |
| Edge relay [V] | Default 2048 points (V 0 to 2047) (changeable) |
| Link relay [B] | Default 8192 points (B 0 to 1 FFF) (changeable) |
| Step relay [S] | Default 8192 points (S0 to 8191) (changeable) |
| Use atmosphere | No corrosive gas |
| Annunciator [F] | Default 2048 points (F 0 to 2047) (changeable) |
| Latch relay [L] | Default 8192 points (L0 to 8191) (changeable) |
| Program capacity | 100K steps (400K bytes) |
| Data register [D] | Default 12288 points (D 0 to 12287) (changeable) |
| Impact resistance | Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions) |
| Link register [W] | Default 8192 points (W 0 to 1 FFF) (changeable) |
| Memory card | 319 (when using Q3MEM-8 MBS) |
| Link direct device | J□□ \ X□□, J□□ \ Y□□, J□□ \ SB□□, J□□ \ SB□□, J□□ \ SB□□, J□□ \ SW□□, J□□ \ SW□ Device specification form for directly accessing the link device of the network unit□ |
| Special relay [SM] | 2048 points (SM 0 to 2047) (Device number is fixed) |
| Estimated lead time | Usually ships in 1 - 10 working days. |
| Function input [FX] | 16 points (FX 0 to F) (Device number is fixed) |
| RUN (PAUSE contact) | One point of each RUN / PAUSE contact can be set from X 0 to 1 FFF |
| SRAM card (1 mbyte) | 517120 points (ZR 0 to 517119) No block switching required |
| Transmission method | Baseband |
| Function output [FY] | 16 points (FY 0 to F) (the number of device points is fixed) |
| SRAM card (2 mbytes) | 1041408 points (ZR 0 to 1041407) No block switching required |
| SRAM card (4 mbytes) | 2087936 points (ZR 0 to 2087935) Block switching not required |
| SRAM card (8 mbytes) | 4184064 points (ZR 0 to 4184063) Block switching not required |
| Flash card (2 mbytes) | 1041408 points (ZR 0 to 1041407) No block switching required |
| Flash card (4 mbytes) | 2087936 points (ZR 0 to 2087935) Block switching not required |
| Interrupt pointer [I] | 256 points (I 0 to 255) (the number of device points is fixed) Periodic interval of system interrupt pointer I 28 to 31 can be set by parameter (0.5 to 1000.0 ms, 0.5 ms increments) Default I 28: 100 ms, I 29: 40 ms, I 30: 20 ms , I31: 10 ms |
| Special register [SD] | 2048 points (SD 0 to 2047) (the number of device points is fixed) |
| Function register [FD] | 5 points (FD 0 ~ 4) (Device number is fixed) |
| Integration timer [ST] | Default 0 point (Shared with low speed integration timer / high speed integration timer) (Changeable) Low speed integration timer / high speed integration timer specified by instruction Set the measurement unit of low speed integration timer / high speed integration timer by parameter (low speed integration timer: 1000 ms, 1 ms increment, default 100 ms) (High-speed integration timer: 0.1 to 100.0 ms, 0.1 ms increments, default 10.0 ms) |
| Link special relay [SB] | Default 2048 points (SB 0 to 7 FF) (changeable) |
| Extended data register [D] | Default 0 point (changeable) |
| Extended link register [W] | Default 0 point (changeable) |
| Link special register [SW] | Default 2048 points (SW 0 to 7 FF) (changeable) |
| Memory card (RAM) (Drive 1) | Amount of installed memory card capacity (maximum 8 Mbytes) |
| Memory card (ROM) (Drive 2) | (Flash card: up to 4 Mbytes, ATA card: up to 32 Mbytes) |
| Memory card (ROM) flash card | 288 books |
| Hub and node longest distance | 100 m |
| Input (output control method) | Refresh method (Direct access input / output possible by specifying direct access input / output (DX, DY)) |
| Number of input (output points) | 4096 points (X / Y 0 to FFF) |
| Number of input (output devices) | 8192 points (X / Y 0 to 1 FFF) |
| Intelligent functional unit device | Device specification that directly accesses buffer memory of intelligent function module Format: U□□ \ G□□ |
| Memory capacity program memory (drive 0) | 400 KB |
| Number of device points internal relay [M] | Default 8192 points (M0 to 8191) (changeable) |
| Maximum number of stored files program memory | 252 books |
| Processing speed sequence instructions LD x 0 | 9.5 ns |
| Programming language sequence control language | Relay symbol word, logic symbolic word, MELSAP 3 (SFC), MELSAP-L, function block, structured text (ST) |
| Index register (general operation register [Z]) | Up to 20 points (Z 0 ~ 19) |
| Transmission specification data transmission speed | 100/10 Mbps |
| Index register [Z] (when 32-bit qualification of ZR device is specified) | Up to 10 points (Z0 to 18) (Use index register [Z] as double word) |
| Intelligent functional unit parameter maximum setting number initial setting | 4096 pieces |
Product details
MPN
Q10UDEHCPU