QD65PD2 - Mitsubishi Electric
MPNQD65PD2
Multifunction counter / timer unit QD65PD2
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| DC 5 v internal current consumption | 0.23 A |
| PWM output output frequency range matching output (high speed) | DC up to 200 kHz |
| External input z phase | Differential input: EIA standard RS-422-A Differential line driver level (AM 26LS 31 (Japan Texas Instruments Inc.)): 2 points DC input: DC 5/12/24 V 7 to 10 mA: 2 points |
| Count input signal phase | One phase input (1/2 multiplication), 2 phase input (1/2 multiplication / 4 multiplication), CW / CCW input |
| Two-phase input (1/2/4 multiplication) | Minimum pulse width: 0.125 μs DC input: 20 μs (ON / OFF each 10 μs), 2 phase 4 multiplication, minimum pulse width (ON / OFF each 0.25 μs)>: 5 μs |
| Duty ratio | Optional (Can be set in increments of 0.1 μs) |
| Applicable connector | A6CON1, A6CON2, A6CON4 (sold separately) |
| External wiring connection method | 40 pin connector X 2 |
| Depth | 90 mm |
| Width | 27.4 mm |
| Shipping weight | 1.2 Kg |
| External dimensions height | 98 mm |
All specifications+29 ▾
| Parameter | Value |
|---|---|
| Mass | 0.15 Kg |
| Model | Addition method, Subtraction method Linear counter type, Ring counter type Preset counter function, Latch counter function |
| Function | DC 5/12/24 V 7 to 10 mA: 2 points |
| Interrupt | Match detection interrupt function available |
| Count range | 32 bit signed binary (-2147483648 to 2147483647) |
| Manufacturer | Mitsubishi Electric |
| Control cycle | 1 ms |
| Latch counter | DC 5/12/24 V 7 to 10 mA: 2 points |
| Channels | 2 channels |
| Estimated lead time | Usually ships in 1 - 10 working days. |
| Out of range output | Count value |
| Output within range | Setting value (lower limit) ≦ count value ≦ set value (upper limit) |
| General purpose output | Transistor (sink type) Output: 8 points DC12 / 24V 0.1 A / 1 point, 0.8 A / 1 common |
| Measurement resolution | 100 ns |
| Match output (low speed) | DC up to 2 kHz |
| Signal levels (φA, φB) | Differential input: EIA standard RS - 422 - A differential line driver level (AM 26 L 31 31 (manufactured by Texas Instruments Incorporated)) DC input: DC 5/12/24 V 7 to 10 mA |
| Number of steps per output | Up to 16 steps / 1 point |
| Number of measurement points | 2 points / channel |
| Counting speed change setting | At differential input: 10 kpps / 100 kpps / 200 kpps / 500 kpps / 1 Mpps / 2 Mpps (at 1/2/4 multiplication) 4 Mpps (at 2/4 multiplication) 8 Mpps (at 4 multiplication) DC input: 10 kpps / 100 kpps / 200 kpps / 2/4 multiplication) |
| Comparison method match output | Set value count value |
| Number of occupied i (O points) | 32 points (I / O assignment: 32 points of intelligence) |
| Counter counting speed (highest) | Differential input: 8 M pulse / s (2 phase multiplied by 4) DC input: 200 k pulse / s |
| General purpose input (low speed) | DC 24 V 3 mA: 4 points |
| Match detection comparative range | 32 bit signed binary |
| Cam switch number of output points | 8 points |
| General purpose input (high speed) | DC 24 V 7 to 10 mA: 2 points |
| Pulse measurement measurement item | Pulse width (ON width / OFF width) |
| External output matching output (high speed) | Transistor (sink type) Output: 2 points DC12 / 24V 0.1 A / 1 point, 0.8 A / 1 common |
| Variations between outputs within the channel | 100 μs or less |
MPN
QD65PD2