Mitsubishi Electric SN25CXAC400V, AC-operated contactor, 400 V coil, weight 0.24 kg, current-production status.
| Parameter | Value |
|---|---|
| Weight | 0.24 kgs |
The Mitsubishi SN25CXAC400V is an AC-operated contactor with a 400 V coil — that coil voltage tells you it's meant for a 400 VAC control circuit, common in European and Asian 400 V line-to-line panels. It's not a 24 VDC or 230 V coil; if your control transformer taps off 400 V, this is the right pull-in voltage.
The SN25CXAC400V is sourced to order against an RFQ through independent distribution.
The part number carries 'SN25', which in Mitsubishi's SN series typically indicates a 25 A frame rating at AC-3 duty for motor switching, but the exact current rating should be confirmed from the nameplate or datasheet for your specific load.
The coil is 400 VAC, so a 480 V supply would overdrive it unless a transformer steps it down. The main contacts' rated insulation voltage may handle 480 V, but the coil voltage is the binding constraint.
No related articles