Skip to main content
Omron CJ1W-NC113 — PLCs (Programmable Logic Controllers)

CJ1W-NC113 Omron CJ1W Position Control Unit, 24VDC

MPNCJ1W-NC113
End of Life

Omron CJ1W-series single-axis position control module, 24 VDC supply, DIN-rail mounted, CE and cULus approved, for use with the CJ Series.

$432.00 – $1,144.42Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

CJ1W-NC113 — Identification
ParameterValue
SeriesCJ1W
CJ1W-NC113 — Electrical
ParameterValue
Supply voltage24VDC
CJ1W-NC113 — Environmental
ParameterValue
Operating temperature range0°C ~ 55°C
CJ1W-NC113 — Mechanical
ParameterValue
Mounting typeDIN Rail
Weight0.221 lb (100.24 g)
Termination styleRectangular Connector
CJ1W-NC113 — Approvals
ParameterValue
Approvals / certificationsCE, cULus
CJ1W-NC113 — Other specifications
ParameterValue
TypeMotion Control Module
FeaturesSingle Axis Control

Product details

What you're looking at

The Omron CJ1W-NC113 is a CJ-series Position Control Unit — a single-axis motion control module that mounts on DIN rail and pulls 24 VDC from the backplane, intended for use with the CJ Series. Operating envelope is 0 °C to 55 °C, the standard CJ-family ambient range; enclosure climate is what governs the real headroom in most factory cabinets.

Where it sits in the panel

As a CJ1W I/O-class module it slots into the same rack as standard CJ I/O; mounting is DIN rail, and the supply, approvals envelope, and 0–55 °C operating window match the rest of the CJ1W family. Approvals on this SKU are CE and cULus — that is the on-record compliance envelope; RoHS, REACH, and IEC declarations are not carried in the listing and should be requested through the compliance pack if a tender asks for them.

The listing carries productStatus Active alongside a flag of eol_hot — read together that means the SKU is still orderable from the factory channel today, with end-of-life pressure building; quote through to date is the safe stance. For a BOM line that has been running on the NC113 for years, the sensible move is to confirm the last-build window now, lock a sparing quantity, and pin a documented alternate before the channel thins. Quote it to your BOM line through the desk and we source against the RFQ.

Single-axis vs the 1-axis alternate CJ1W-NC133

The closest functional second-source inside the same family is the CJ1W-NC133 — also single-axis, same DIN-rail mount, same 24 VDC supply, same rectangular-connector termination, same 0–55 °C window, same CE/cULus approvals. On every cited line the two SKUs read identically, so panel layout and PLC programming carry over.

On refurbished supply

For end-of-life or constrained supply the refurb channel earns its keep on CJ1W-class boards: every unit pulled, recapped where the electrolytics are out of spec, then fully tested and burned-in against the axis loop before grading — so a refurbished right unit is a safer spare than a pulled-untested listing, and the rework document travels with it.

Frequently asked questions

What is the closest functional second-source — the CJ1W-NC133?

Yes — the CJ1W-NC133 is the same single-axis, DIN-rail, 24 VDC, rectangular-connector, 0–55 °C, CE/cULus module and drops in without layout or programming rework on the cited specs.

What is the listed type for CJ1W-NC113?

Motion Control Module, CJ-series Position Control Unit.

What series is CJ1W-NC113?

Series CJ1W, for use with the CJ Series family.

Will CJ1W-NC113 drop into a panel specified around CJ1W-NC133 without rewiring?

On the cited specs the two share DIN-rail mounting, 24 VDC supply, rectangular-connector termination, 0–55 °C operation, and CE/cULus approvals — so wiring and slot geometry carry over. Verify the program / axis configuration against the host PLC project before commissioning.

MPN
CJ1W-NC113