Fit and function for the BOM line
This CP2E-N14DT-A is an I/O expansion slice for the Omron CP2E PLC family. It carries 8 digital inputs and 6 solid-state outputs, powered from a 100 ~ 240VAC supply rail. Screw terminals keep wiring consistent with the CPU and other slices in the rack, and the DIN-rail mount matches the rest of the CP2E backplane footprint. The solid-state outputs on the -A suffix swap in where inductive load switching or higher cycle counts make relay life a concern.
The module provides 8 digital inputs and 6 solid-state outputs from a 100-240VAC supply, operating from -20°C to 60°C.
Where the class is used
This is a local I/O expansion module for the CP2E series, typically mounted on a DIN rail adjacent to the CPU to add mixed digital I/O for a small machine cell or conveyor zone. The solid-state output variant suits frequent on-off cycles for solenoid valves, indicator lamps, or DC motor contactors where relay wear is unacceptable.
This part carries an Active lifecycle status from the manufacturer. For a BOM line under freeze, that means standard lead times through the Omron distribution channel apply. For cross-border procurement, the part is regionally available — same genuine Omron production, different passport (factory packaging, not a gray-market relabel). I can source it against your RFQ with traceable documentation. No substitute needed; the original is still on the line.