Omron CP2E-N30DT-A I/O Module, 18 digital inputs, 12 solid-state outputs, 100 - 240VAC supply, DIN rail mount, screw terminals.
| Parameter | Value |
|---|---|
| Series | CP2E |
| Parameter | Value |
|---|---|
| Inputs (count and type) | 18 - Digital |
| Outputs (count and type) | 12 - Solid State |
| Parameter | Value |
|---|---|
| Supply voltage | 100 ~ 240VAC |
| Parameter | Value |
|---|---|
| Operating temperature range | -20°C~60°C |
| Parameter | Value |
|---|---|
| Mounting type | DIN Rail |
| Termination style | Screw Terminal |
| Parameter | Value |
|---|---|
| Type | Input, Output (I/O) Module |
The CP2E-N30DT-A is a CP2E-series I/O module from Omron, packing 18 digital inputs and 12 solid-state outputs into a single DIN-rail housing. Powered from 100–240 VAC with screw-terminal wiring, it handles the machine I/O for basic automation tasks where relay noise or lifespan is a concern.
Mounts on DIN rail; terminates via screw terminals. Operating temperature range -20°C to 60°C.
The CP2E-N30DT-A has 12 solid-state outputs; the CP2E-N30DR-A has 12 relay outputs. Both have the same 18 digital inputs, supply voltage (100–240 VAC), DIN-rail mounting, and screw terminals. The solid-state outputs switch faster and last longer but have lower surge capacity and higher off-state leakage.
Physically yes — same footprint, same terminal layout, same supply voltage. Electrically, check that the downstream loads are compatible with solid-state outputs (lower overload, higher leakage). No wiring change needed.
No related articles