Skip to main content
Log in
Omron CRT1-MD16SH-1 — PLC I/O & Expansion Modules

Omron CRT1-MD16SH-1 I/O Module

MPNCRT1-MD16SH-1
Active

Omron CRT1 series, Input, Output (I/O) Module, CRT1-MD16SH-1, 8 digital inputs, 8 solid-state outputs, DIN rail mount, CE, cULus.

$2,091.60Ref. price · indicative, final on quote
Omron CRT1-MD16SH-1 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

CRT1-MD16SH-1 — Identification
ParameterValue
SeriesCRT1
TypeInput, Output (I/O) Module
Compatible / related productsCJ, CS, NJ Series
CRT1-MD16SH-1 — I/O
ParameterValue
Inputs (count and type)8 - Digital
Outputs (count and type)8 - Solid State
CRT1-MD16SH-1 — Environmental
ParameterValue
Operating temperature range-10°C ~ 55°C
CRT1-MD16SH-1 — Mechanical
ParameterValue
Termination styleRectangular Connector, Screw Terminal
Mounting typeDIN Rail
CRT1-MD16SH-1 — Approvals
ParameterValue
Approvals / certificationsCE, cULus
CRT1-MD16SH-1 — Other specifications
ParameterValue
Weight0.265 lb (120.2 g)

Product details

Mixed I/O for Compact Machine Control

The Omron CRT1-MD16SH-1 is a mixed I/O module that packs 8 digital inputs and 8 solid-state outputs into a single DIN-rail unit, sized for the CJ, CS, and NJ series backplanes. The solid-state outputs switch faster and last longer than relay outputs in high-cycle applications — no contact wear to budget for on a pick-and-place or packaging line.

DIN Rail Fit and Termination

Mounts on standard DIN rail and terminates through a rectangular connector for the backplane plus screw terminals for field wiring — no special tooling needed at the panel.

Active Production, Sourced to Order

Carries CE and cULus approvals, so it lands in panels destined for North American and European lines without a separate agency review.

Frequently asked questions

Is the Omron CRT1-MD16SH-1 compatible with the NJ series?

Yes, the CRT1-MD16SH-1 is listed for use with CJ, CS, and NJ series controllers — it mates directly to the CRT1 backplane on those racks.

Can CRT1-MD16SH-1 replace CRT1-MD16S?

The CRT1-MD16SH-1 is the current variant of the CRT1-MD16S. Both carry the same 8-input, 8-output configuration and backplane compatibility. Confirm the exact BOM position and any firmware revision notes before swapping.

Does the CRT1-MD16SH-1 include the connector or terminal block?

The module ships with the rectangular backplane connector and screw terminals for field wiring — no separate connector order needed for the I/O side.

MPN
CRT1-MD16SH-1