OMRON CRT1-OD08TAH Output Module, Series CRT1, 8 Solid State Outputs, DIN Rail Mount, Rectangular Connector & Screw Terminal, CE/cULus.
| Parameter | Value |
|---|---|
| Series | CRT1 |
| Type | Output Module |
| Compatible with | CJ, CS, NJ Series |
| Parameter | Value |
|---|---|
| Outputs and output technology | 8 - Solid State |
| Parameter | Value |
|---|---|
| Operating temperature range | -10°C~55°C |
| Parameter | Value |
|---|---|
| Mounting type | DIN Rail |
| Termination style | Rectangular Connector, Screw Terminal |
| Parameter | Value |
|---|---|
| Approvals / certifications | CE, cULus |
| Parameter | Value |
|---|---|
| Weight | 0.419 lb (190.06 g) |
The OMRON CRT1-OD08TAH is an 8-point solid-state output module in the CRT1 CompoNet remote I/O family. It switches loads without moving contacts – no coil hum, no relay wear – so it runs cool and lasts for high-cycle valve banks or indicator lamp arrays. Mounts on DIN rail and connects through a rectangular connector for the bus cable and screw terminals for field wiring. Compatible with CJ, CS, and NJ-series PLCs via a CompoNet master.
It is an Output Module with 8 solid-state outputs.
Series CRT1 – part of the CompoNet remote I/O platform.
No. The CP2E-E20DR-A is a standalone PLC CPU. The CRT1-OD08TAH is a remote I/O module that must be paired with a CompoNet master on a CJ, CS, or NJ-series PLC. It will not fit the same panel cutout or electrical scheme.
The module carries CE and cULus approvals. Standard OMRON declarations of conformity are available upon request.
No related articles