16 solid‑state outputs on a CJ‑compatible slice
The CRT1-OD16TA is a 16-point solid‑state output module for Omron’s CJ, CS, and NJ series controllers. Solid-state switching means no coil arcing, no contact bounce – useful when you’re pulling signal into a noise‑sensitive analog card on the same rack. Wiring lands on a rectangular connector with screw terminals, so each output can be landed independently. DIN rail mounting matches the standard backplane layout.
Not a drop‑in for the CP2E chassis
The CP2E‑S40DT1‑D is a self‑contained CPU with 24 digital inputs and 16 solid‑state outputs, not an expansion module. Different form factor, different backplane connector. The CRT1‑OD16TA expands a CJ/CS/NJ rack; it will not land on a CP2E backplane without an adapter‑less rewrite.
Integrator notes – mounting and signal isolation
Rectangular connector with screw terminals – expect a mating header or direct screw‑clamp wiring. Keep output cables separated from input and analog lines inside the panel to keep switching noise off the backplane. The –10°C to 55°C range is ambient; if the module sits above a heat‑generating CPU, leave a slot gap for airflow.