The Omron CRT1-VOD32ML is a 32-point solid state output module in the CRT1 series, designed for CJ, CS, and NJ series controllers. It packs thirty-two solid-state outputs into a single DIN-rail slice, terminated through a rectangular connector – not screw terminals, so factor in a pre-wired cable or matching harness for the cabinet layout.
Terminal style vs. the CP1W sibling
The closest functional peer is the CP1W-32ET – same 32-point solid-state count, same DIN-rail footprint. The deal-breaker difference: this CRT1 module uses a rectangular connector (bulkhead-mated, factory-crimped) while the CP1W-32ET uses screw clamp terminals. No direct swap without re-terminating the field wiring. If your panel is already wired with screw-terminal strips, the CP1W-32ET is the drop-in; if you have pre-made connectorized cables, this one fits.
Rated for -10°C to 55°C ambient, with CE, cULus, and NK approval. Mounts onto standard DIN rail; the rectangular connector carries all 32 output signals plus common. Intended for CJ, CS, and NJ PLC families – verify the backplane bus compatibility per your specific CPU version during commissioning.