The E2AS08KS02WPD22MOMS: M8 flush-mount inductive sensor delivering a 2 mm sensing range from a stainless steel barrel rated IP67 and IP69K. The normally closed output pulls low on target absence — a typical fail-safe arrangement for position verification in washdown zones. 2-wire DC operation simplifies wiring but limits output to one state; the part draws 10 mA quiescent and switches loads up to 200 mA at 10–32 VDC. Switching frequency of 1.5 kHz suits moderate-speed cam or cylinder sensing.
Compared to the 3-wire sibling E2AS08KS02WPB2102MOMS, this 2-wire version eliminates the need for a separate common line but uses the same NC logic. A panel wired for 3-wire would require rewiring the sensor end, though the mounting footprint (M8, flush) and sensing distance (2 mm) are identical. The normally-open variant E2AS08KS02WPD12MOMS shares the same 2-wire termination — reversing the logic may suit opposite safety requirements but does not change the mechanical fit.
Lifecycle stage is current — no phase-out or LTB signals. The E2A series is a long-running Omron platform with broad availability through distribution. Standard supply lead times apply; BOM lines can be specified with confidence.