The Omron E2AS18KS08WPB15MOMS is an M18 flush-mount inductive proximity sensor from the E2A series. It detects ferrous targets up to 8 mm away and switches at 500 Hz, making it a right-sized spec for high-speed part detection or position sensing on conveyors and packaging lines. Rated IP67 and IP69K, the stainless steel housing withstands high-pressure washdown and caustic cleaning agents — what the techs need for food, beverage, or pharmaceutical zones where hygiene is non-negotiable. The normally open output switches loads up to 200 mA across a 10–32 VDC supply, drawing just 10 mA itself. Termination is a 3-pin stranded wire cable, so panel builders can land it straight into a terminal block without extra connectors.
8 mm sensing distance is measured for a standard mild steel target; the flush-mount design means you can mount the sensor flush with the mounting surface without derating that range — important when space is tight. 500 Hz switching frequency handles fast-moving targets — think counting bottles at 500 per minute or monitoring a gear tooth. The 10 % repeat accuracy keeps detection edges consistent.