Omron E2B Series, M18 unshielded proximity switch, PNP Normally Closed, 16 mm sensing distance, 5 m PVC cable.
| Parameter | Value |
|---|---|
| Sensing distance | 16mm sensing distance |
| Parameter | Value |
|---|---|
| Operation mode | Normally closed |
| Parameter | Value |
|---|---|
| Cable length | 5 meter cable |
| Parameter | Value |
|---|---|
| Shield | Unshielded |
| Weight | 1.36 kgs |
| Housing size | 18 mm diameter |
| Barrel length | Long body |
| Connection type | Pre-wired, PVC |
| Power source and output | PNP |
| Housing shape and material | Cylindrical, metric thread, brass |
The E2B-M18LN16-WP-B2 5M: Both are M18, unshielded, normally closed, and use PVC cable. The E2K-X8MY2 runs on 100–220 VAC with 2-wire output; this E2B is PNP DC. You cannot drop one into the other’s panel without swapping the input card or adding an interposing relay. If your BOM is already wired for AC, the E2K is the right call — for a modern DC automation bay, the E2B is the one.
No. The E2K-X8MY2 uses 2-wire AC output (100–220 VAC), while this E2B is PNP DC. You would need to rewire the input card or add a relay.
No related articles