Omron E2B E2B-M30KN20-WP-B1 2M, cylindrical inductive proximity sensor, 30 mm, unshielded, 20 mm, PNP, NO, 2 m cable.
| Parameter | Value |
|---|---|
| Sensing distance | 20mm sensing distance |
| Parameter | Value |
|---|---|
| Operation mode | Normally open |
| Parameter | Value |
|---|---|
| Cable length | 2 meter cable |
| Parameter | Value |
|---|---|
| Shield | Unshielded |
| Weight | 0.00 kgs |
| Housing size | 30 mm diameter |
| Barrel length | Short body |
| Connection type | Pre-wired, PVC |
| Power source and output | PNP |
| Housing shape and material | Cylindrical, metric thread, brass |
The E2B-M30KS15-WP-B2 2M looks the same body and connector, but it's shielded and normally closed. Shielded means you can flush-mount it without a dead zone, but the sensing range drops to 15 mm. If your panel is designed for a NO output and needs the full 20 mm reach, sticking with the unshielded KN20 is the move. The shielded sibling would require both a wiring change (NC to NO) and a closer target. No rework-free swap.
Not without changes. The shielded version has a 15 mm sensing distance and a normally closed output, so you'd need to adjust both the mounting clearance and the wiring logic. The unshielded KN20 is the one to order for a 20 mm NO application.
No related articles