Skip to main content
Log in
Omron E2BM12KN08WPB22MOMI — Proximity Sensors

Omron E2BM12KN08WPB22MOMI Inductive Sensor, PNP 8mm

MPNE2BM12KN08WPB22MOMI

Omron E2B series M12 non-flush inductive sensor, PNP, 8 mm sensing distance, 2 m cable, IP67.

$63.05 – $69.82Ref. price · indicative, final on quote
Omron E2BM12KN08WPB22MOMI datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2BM12KN08WPB22MOMI — Identification
ParameterValue
SeriesE2B
E2BM12KN08WPB22MOMI — Sensing
ParameterValue
Sensing distance, max.8 mm
E2BM12KN08WPB22MOMI — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 2 m
E2BM12KN08WPB22MOMI — Output
ParameterValue
Switching frequency800 Hz
Load current200 mA
E2BM12KN08WPB22MOMI — Mechanical
ParameterValue
Mounting typeNon Flush Mount
Length47 mm
Housing materialBrass Nickel Plated
E2BM12KN08WPB22MOMI — Environmental
ParameterValue
Operating temperature, max.70 °C
Operating temperature, min.-25 °C
IP protection ratingIP67

Product details

Omron E2BM12KN08WPB22MOMI is an M12 non-flush inductive sensor from the E2B series, rated for 8 mm sensing distance at 800 Hz switching frequency.

Switching and electrical ratings

PNP normally-open output, 200 mA load current, 10–30 V operating voltage, 10 mA consumption, 800 Hz switching frequency.

Construction and protection

Brass nickel-plated housing, sealed to IP67, with a 2 m PVC cable. The cable is fixed – no M12 connector – so if your panel layout expects a Eurofast quick-disconnect, this sensor requires a terminal strip or an intermediate junction box. The nickel plating resists light corrosion and wet environments; IP67 means it survives hose-down but not continuous submersion.

Second-source reality: don’t expect a drop-in from flush siblings

The E2BS08KS02MCB120OMS (M8, flush, 2 mm, connector) and the E2AM12KS04M1B14OMS (M12, flush, 4 mm, connector) are flush-mount sensors; neither can replace this non-flush unit without mechanical redesign.

Frequently asked questions

What is the closest functional second-source to this sensor?

No direct second-source exists because the mounting type (non-flush vs flush) changes the physical installation. The E2BS08KS02MCB120OMS is an M8 flush sensor with a 2 mm range; the E2AM12KS04M1B14OMS is an M12 flush sensor with a 4 mm range – neither substitutes without mechanical redesign.

MPN
E2BM12KN08WPB22MOMI