Skip to main content
Log in
Omron E2BM12KS02WPB12MOMI — Proximity Sensors

Omron E2BM12KS02WPB12MOMI Inductive Sensor, PNP NO, 2 mm, IP

MPNE2BM12KS02WPB12MOMI

Omron E2B series inductive proximity sensor, M12 flush-mount, PNP normally open, 2 mm sensing distance, 2 m cable, IP67.

$47.51 – $53.28Ref. price · indicative, final on quote
Omron E2BM12KS02WPB12MOMI datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2BM12KS02WPB12MOMI — Identification
ParameterValue
SeriesE2B
E2BM12KS02WPB12MOMI — Sensing
ParameterValue
Sensing distance, max.2 mm
E2BM12KS02WPB12MOMI — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 2 m
E2BM12KS02WPB12MOMI — Output
ParameterValue
Switching frequency1.5 kHz
Load current200 mA
E2BM12KS02WPB12MOMI — Mechanical
ParameterValue
Mounting typeFlush Mount
Length47 mm
Housing materialBrass
E2BM12KS02WPB12MOMI — Environmental
ParameterValue
Operating temperature, max.70 °C
Operating temperature, min.-25 °C
IP protection ratingIP67

Product details

The Omron E2BM12KS02WPB12MOMI is a flush-mount M12 inductive proximity sensor from the E2B series, delivering a 2 mm sensing distance with a PNP normally-open output. It runs on 10–30 VDC, draws 10 mA no-load, and can switch up to 200 mA at 1.5 kHz — fast enough for counting small parts on a pick-and-place or detecting cam positions on a packaging machine. The brass housing carries IP67, so it handles coolant splash and washdown without a second thought.

This M12 body gives the same 2 mm sensing distance and switching speed as the M8 sibling, but requires a 17 mm mounting hole versus 13 mm.

Listed with a current lifecycle stage, so this is still a standard production item — no last-time-buy panic, no need to stockpile.

Flush-mount allows embedding in metal without derating the 2 mm sensing distance. The 2 m cable is PVC-jacketed, stripped and tinned for screw terminals or spring clamps.

Frequently asked questions

When sourcing E2BM12KS02WPB12MOMI, what's the closest functional second-source — E2BS08KS02MCB120OMS?

The E2BS08KS02MCB120OMS is a functional peer with the same 2 mm sensing distance, PNP NO output, and 1.5 kHz switching speed, but in a smaller M8 stainless steel housing with an M8 connector instead of a 2 m cable. It won't drop into the same mounting hole without a bushing, but electrically it's a direct swap.

Will E2BM12KS02WPB12MOMI drop into a panel that was specified around E2BS08KS02MCB120OMS without rewiring?

No — the M12 body requires a 17 mm hole versus the M8's 13 mm, so you'll need to open the mounting hole or use a reducer bushing. Wiring is the same three-wire PNP scheme, so no rewiring needed if the cable reaches.

MPN
E2BM12KS02WPB12MOMI