Omron E2E Small Diameter, shielded, normally closed NPN output, 5 mm diameter threaded case, 1.2 mm sensing distance, 2 m PVC cable.
| Parameter | Value |
|---|---|
| Sensing distance | 1.2 mm sensing distance |
| Shielding | Shielded |
| Parameter | Value |
|---|---|
| Operation mode | Normally closed |
| Parameter | Value |
|---|---|
| Size | 5mm diameter |
| Cable length | 2 meter length |
| Parameter | Value |
|---|---|
| Case | Threaded |
| Weight | 0.45 kgs |
| Connecting method | Pre-wired model |
| Cable specifications | PVC cable |
| Output specifications | DC 3-wire NPN open-collector |
The E2E-S05S12-WC-C2 2M: The E2C-X1R5AH looks like a sibling — shielded threaded cylinder — but it's a sensor head for an amplifier unit, not a self-contained DC switch. Mounting size is M8 vs M5, sensing distance 1.5 mm vs 1.2 mm, and the cable length differs (3 m vs 2 m). No common electrical interface without rewiring. If your panel was specced around the E2C, this E2E won't slide in without a rethink.
Threaded case with a 5 mm diameter.
No. The E2C-X1R5AH requires an amplifier unit (separate), has an M8 threaded body versus M5, different sensing distance (1.5 mm vs 1.2 mm), and different cable length. Direct replacement would require mechanical and electrical changes.
No related articles