Omron E2E-Next, shielded DC 2-wire proximity switch, 10 mm range, normally closed, 2 m PVC cable.
| Parameter | Value |
|---|---|
| Sensing distance | 10 mm range |
| Shielding | Shielded |
| Parameter | Value |
|---|---|
| Operation mode | Normally closed |
| Parameter | Value |
|---|---|
| Cable length | 2 meter cable |
| Parameter | Value |
|---|---|
| Weight | 0.00 kgs |
| Polarity | Polarity |
| New model | New model |
| Cable type | PVC cable |
| Body length | Standard length |
| Output configuration | DC 2-wire |
| Oscillation frequency | Standard freq. |
The E2E-X10D2-N 2M: Both are shielded, 2-wire DC sensors from the same E2E family, but the E2E-X2D1-M3G is normally open and rates only 2 mm range. If your panel was wired for NC logic and a 10 mm gap, the M3G won't swap without rewiring and re-spacing the target.
The sensing distance is 10 mm in its shielded configuration.
It is a DC 2-wire, normally closed output.
No related articles