Omron E2E-X12B1D18 5M M18 Inductive, 12mm PNP-NO, IP69K
Omron E2E NEXT series inductive proximity sensor, M18 threaded cylinder, shielded, PNP-NO 3-wire, 12mm sensing distance, 5m cable, IP67/IP69K.
Specifications
| Parameter | Value |
|---|---|
| Series | E2E NEXT |
| Parameter | Value |
|---|---|
| Sensing distance | 0.472" (12mm) |
| Shielding | Shielded |
| Parameter | Value |
|---|---|
| Operating temperature range | -25°C ~ 70°C |
| Parameter | Value |
|---|---|
| Case | Cylinder, Threaded - M18 |
| Indicator | LED |
| Output signal | PNP-NO, 3-Wire |
| Sensor type | Inductive |
| Material - body | Nickel-Plated Brass |
| Supply voltage | 10V ~ 30V |
| Termination style | Cable Leads |
| IP rating | IP67, IP69K |
| Response frequency | 500Hz |
Product details
Frequently asked questions
What is the sensing distance and output type?
The sensing distance is 12mm on mild steel, and the output is PNP normally open (NO) with a 3-wire configuration.
What is the IP rating and temperature range?
Ingress protection is IP67 and IP69K; operating temperature is -25°C to 70°C.
The Omron E2E-X12B1D18 5M is an inductive proximity sensor from the E2E NEXT series, with 12mm sensing distance, shielded M18 barrel, and PNP-NO output via cable leads. Sensing distance holds at 12mm on mild steel, and the 500Hz response frequency keeps up with fast-moving parts on a conveyor or indexing table. The sensor carries IP67 and IP69K ingress protection ratings. Supply voltage is 10 to 30 VDC; the shielded housing allows flush mounting in steel without derating the sensing range.
Which sibling fits your panel?
That means if your existing wiring expects a NC channel for fail-safe monitoring, the E2E-X12B1D18 5M only covers the NO leg; you would need an additional sensor or a logic change to replicate the NC function. The sensor has cable leads for termination, suitable for permanent wiring.