Omron E2E NEXT series, E2E-X18MB230-M1 inductive proximity switch, M30 unshielded, 18 mm range, PNP normally closed, M12 connector.
| Parameter | Value |
|---|---|
| Sensing distance | 18 mm range |
| Shielding | Unshielded |
| Parameter | Value |
|---|---|
| Operation mode | Normally closed |
| Parameter | Value |
|---|---|
| Weight | 0.00 kgs |
| Body length | Standard length |
| Body diameter | M30 size |
| Connection method | M12 connector |
| IO-Link baud rate | Non IO-Link |
| Output configuration | DC 3-wire, PNP |
| Oscillation frequency | Standard freq. |
The E2E-X18MB230-M1: Standard M30 inductive proximity sensor from Omron's E2E NEXT line. Unshielded body lets you flush-mount in steel if the target material allows. 18 mm sensing distance is typical for this form factor. PNP output, normally closed, DC 3-wire. Standard-frequency oscillator — no IO-Link, no fieldbus on board. M12 connector, straight pinout. Lifecycle is current, so it's an active catalog line.
Current production. Sourced to order.
Not without re-engineering. The E2KQ-X10ME1 is a capacitive sensor with different output (NPN-NO, not PNP-NC) and cable termination instead of M12. The sensing principle and electrical characteristics do not match.
No. The wiring is different — the E2KQ-X10ME1 uses cable leads, while this part uses an M12 connector. Output type and logic also differ. A direct swap is not possible.
No related articles