Detection fit at line speed
The Omron E2E-X2B1D12 5M is an inductive proximity sensor from the E2E NEXT series, delivering 2 mm shielded sensing in an M12 threaded barrel. Output is PNP-NO, 3-wire, so it mates directly to a standard PLC sinking input without a pull-up resistor. Response frequency at 1.5 kHz means it catches targets moving past at line speed without missed pulses. The nickel-plated brass body and IP67/IP69K rating let it shrug off the spray in a bottling filler or on a washdown conveyor. Supply voltage range is 10 V to 30 V DC.
No pin-compatible alternative is listed within the E2E NEXT family that carries the same 2 mm shielded range and PNP-NO output. If you need a different sensing distance or output logic, the series offers variations, but this exact order code is a single-source-call for the spec listed.
Installation and wiring
Mounts flush due to shielded construction — no derating needed when embedded in metal. The M12 threaded barrel fits standard mounting clamps and gland plates. LED indicator on the sensor body gives visual state confirmation during commissioning and fault finding. Cable leads. Output is PNP-NO, 3-wire.