The Omron E2E-X2D2-M3G is a shielded inductive proximity switch from the E2E/E2E NEXT series, designed for ferrous-metal detection with a 2 mm sensing range. Normally closed (NC) output and DC 2-wire configuration simplify integration — two wires carry both power and signal, dropping the need for a separate load resistor. The M8 4-pin connector (IEC arrangement) allows quick swap without re-terminating cable glands. Body is standard length and shielded, meaning it can be flush-mounted in metal without derating the sensing distance. Polarity sensitivity matters: the 2-wire DC output is polarity-dependent, so verify the input card's sink/source configuration before wiring.
Omron E2E-X2D2-M3G Proximity Switch, 2 mm Shielded NC
MPNE2E-X2D2-M3G
Omron E2E Series, Shielded Proximity Switch, Normally Closed, DC 2-wire, 2 mm range, M8 4-pin connector.
$66.80Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Sensing
| Parameter | Value |
|---|---|
| Sensing distance | 2 mm range |
| Shielding | Shielded |
Output
| Parameter | Value |
|---|---|
| Operation mode | Normally closed |
Other specifications
| Parameter | Value |
|---|---|
| Weight | 0.45 kgs |
| Polarity | Polarity |
| Body length | Standard length |
| Connection method | M8 4-pin connector (IEC arrangement) |
| Output configuration | DC 2-wire |
| Oscillation frequency | Standard freq. |
Product details
Frequently asked questions
What is the sensing distance and output type?
2 mm shielded range with normally closed (NC) DC 2-wire output. Polarity must match the input device.
Will the E2C-X1R5AH drop in as a substitute?
No. The E2C-X1R5AH is a heat-resistance model with a separate amplifier, pre-wired cable, different mounting, and a 200 °C temperature rating. It requires rewiring and panel changes.
MPN
E2E-X2D2-M3G