Skip to main content
Log in
Omron E2E-X3B1D8-M3 — Proximity Sensors

Omron E2E-X3B1D8-M3 M8 Shielded Prox, PNP, 3mm

MPNE2E-X3B1D8-M3

Omron E2E NEXT Series, M8 shielded inductive proximity sensor, 3 mm range, PNP normally open, M8 4-pin connector, IO-Link 38.4 kbps.

$178.32Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

E2E-X3B1D8-M3 — Sensing
ParameterValue
Sensing distance3 mm range
ShieldingShielded
E2E-X3B1D8-M3 — Output
ParameterValue
Operation modeNormally open
E2E-X3B1D8-M3 — Other specifications
ParameterValue
Weight0.00 kgs
Body lengthStandard length
Body diameterM8 size
Connection methodM8 4-pin connector
IO-Link baud rateIO-Link 38.4 kbps
Output configurationDC 3-wire, PNP
Oscillation frequencyStandard freq.

Product details

Omron E2E-X3B1D8-M3 is an M8 shielded proximity sensor from the E2E NEXT series, offering a 3 mm sensing distance with PNP normally open output and an M8 4-pin connector. It supports IO-Link communication at 38.4 kbps, giving integrators access to parameterization and diagnostics beyond simple on-off signaling.

Fit & Interchangeability

Sensor is a shielded M8 body, standard length, with an M8 4-pin connector. Mounting and cable harness must match that connector type. The 3 mm range (flush mount) and PNP NO output are common in most PLC DC input cards. This sensor uses an M8 4-pin connector, not a pre-wired cable. Replacing a pre-wired sensor like the E2C-X1R5AH (3 m leads) requires changing the connector and possibly the mounting footprint.

Frequently asked questions

Can I replace an E2C-X1R5AH with the E2E-X3B1D8-M3?

Not as a direct swap. The E2C-X1R5AH is a heat-resistant model with pre-wired cables, 1.5 mm sensing distance, and requires an amplifier unit. The E2E-X3B1D8-M3 uses an M8 connector, has 3 mm range, and integrates the amplifier. Panel rewiring and possibly mounting changes are needed.

MPN
E2E-X3B1D8-M3