Omron E2E/E2E NEXT, Shielded Proximity Switch, E2E-X3D2-N 5M, DC 2-wire NC, 3 mm range, 5 m cable.
| Parameter | Value |
|---|---|
| Sensing distance | 3 mm range |
| Shielding | Shielded |
| Parameter | Value |
|---|---|
| Operation mode | Normally closed |
| Parameter | Value |
|---|---|
| Cable length | 5 meter cable |
| Parameter | Value |
|---|---|
| Weight | 0.45 kgs |
| Polarity | Polarity |
| New model | New model |
| Cable type | PVC cable |
| Body length | Standard length |
| Output configuration | DC 2-wire |
| Oscillation frequency | Standard freq. |
The Omron E2E-X3D2-N 5M is a shielded DC 2-wire proximity switch in the E2E/E2E NEXT series, configured normally closed with a 3 mm sensing range and a 5-meter PVC cable. Shielded means it can be flush-mounted in metal without derating the sensing distance. The 2-wire DC output reduces wiring count but watch the off-state leakage current—typical for this topology—when driving a PLC input with high off-state current threshold.
E2E-X2D1-M3G is a peer from the same series but differs in output logic (normally open vs. normally closed) and connection method (M8 connector vs. 5 m cable). It is not a direct functional second-source without rewiring.
No. The output logic is normally closed instead of normally open, so the signal polarity is inverted. Additionally, the cable versus M8 connector requires different wiring. A logic or physical change is needed.
No related articles