The E2E-X5B1DL18 2M: Shielded M18 PNP proximity sensor from the E2E NEXT series. 5 mm flush detection, 10-30V DC supply, 200 mA max load on the NO output. 2 m pigtail with bare wire termination — no connector to fail in wet environments. IP69K-rated nickel-plated brass body withstands washdown. Indicator LED on the end cap gives a quick go/no-go on the sensing face. Clamping nuts and toothed washer included, so the mounting hardware is in the bag.
Same family, same 5 mm sensing distance, same output and cable length as the E2E-X5B1D18 2M. Body length is 77 mm versus 55 mm on the short version.
Current production stage per Omron's lifecycle. No last-time-buy or phase-out signals. Complies with CE, CSA, and UL 60947-5-2-14, so documentation matches the global proximity switch standard IEC 60947-5-2.
M18 threaded mount with included nuts and washer. 2 m cable gives flexibility for gland plate routing. Bare wire termination — screw terminal or junction box required; no plug. IP67G (with O-ring) and IP69K performance depend on a clean mating surface for the O-ring seal. Sensor orientation does not affect sensing performance.