15 mm flush mount in an M30 barrel — what the ratings mean for the line
The E2EX15B3D302MOMS: This Omron E2E-Next inductive proximity sensor detects ferrous targets at 15 mm through a flush-mount M30 barrel — that range is finger-protection class per IEC 61496-1, meaning it catches a hand or tool reaching into a hazard zone before contact. The IP67G and IP69K ratings on the same housing mean the sensor body and the sensing face both survive high-pressure washdown at 80 bar and 80 °C water — common in food-and-beverage and pharmaceutical lines where caustic cleaning cycles are daily. Runs on 10-30 VDC, draws 20 mA quiescent, and switches up to 100 mA load through the PNP output — configurable as NO or NC via the wiring. The 250 Hz switching frequency is fast enough for counting parts on a conveyor at moderate line speed.
Mounting and termination — panel fit without surprises
Flush mount in a standard 30 mm through-hole; the brass nickel-plated barrel is 60.3 mm long. The 2-meter PVC cable exits the back — no connector to source or mate, which simplifies the BOM but means the cable length is fixed at install. Temperature range from -40 °C to 85 °C covers freezer lines and hot washdown zones without derating. The brass housing with nickel plating resists corrosion better than unplated brass in wet environments.
Sourcing and lifecycle — active production, no obsolescence watch
Quoted to order against your BOM quantity. Availability and current pricing confirmed at RFQ time — no stock-holding claim, but this is a mainstream Omron part with broad channel coverage.