Skip to main content
Log in
Omron E2EX15B3DL30M1OMS — Proximity Sensors

Omron E2EX15B3DL30M1OMS M30 Inductive Sensor, 15 mm, PNP, IP

MPNE2EX15B3DL30M1OMS

Omron E2E-Next series inductive sensor, M30 flush mount, 15 mm sensing distance, PNP NO/NC output, M12 connector, IP67/IP69K rated.

Omron E2EX15B3DL30M1OMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX15B3DL30M1OMS — Identification
ParameterValue
SeriesE2E-Next
E2EX15B3DL30M1OMS — Sensing
ParameterValue
Sensing distance, max.15 mm
E2EX15B3DL30M1OMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeConnector, M12, 4-Pin
E2EX15B3DL30M1OMS — Output
ParameterValue
Switching frequency250 Hz
Load current100 mA
E2EX15B3DL30M1OMS — Mechanical
ParameterValue
Mounting typeFlush Mount
Length80 mm
Housing materialBrass Nickel Plated
E2EX15B3DL30M1OMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP69K
E2EX15B3DL30M1OMS — Other specifications
ParameterValue
Construction formM30
Current consumption20 mA
Inductive sensor output typePNP;NO/NC

Product details

The Omron E2EX15B3DL30M1OMS is a flush-mount inductive proximity sensor from the E2E-Next series, in an M30 cylindrical housing of brass nickel-plated construction. Rated IP67 and IP69K, it withstands high-pressure washdown environments typical in food and beverage or chemical processing lines. The PNP output is programmable NO/NC, operating from 10 to 30 VDC with a switching frequency of 250 Hz and a maximum sensing distance of 15 mm. Current consumption is 20 mA; the load current limit is 100 mA.

Frequently asked questions

What are the key ratings of this sensor?

Flush-mount M30 inductive sensor from the E2E-Next series, sensing distance 15 mm, switching frequency 250 Hz, PNP output programmable NO/NC, operating voltage 10–30 VDC, current consumption 20 mA, load current 100 mA, protection rating IP67/IP69K.

Can I replace a cable-terminal sensor like E2EX15B3DL305MOMS with this M12 connector version?

Yes, the sensing characteristics are identical (15 mm, 250 Hz, PNP NO/NC). The connector variant is 80 mm long vs 82.3 mm for the cable versions, and is rated IP67/IP69K (cable versions add IP67G). The mounting format is the same M30 flush. You will need an M12 mating cable instead of direct wiring through a gland.

MPN
E2EX15B3DL30M1OMS