Skip to main content
Log in
Omron E2EX16MB2L182MOMS — Proximity Sensors

Omron E2EX16MB2L182MOMS M18 PNP NC 16mm

MPNE2EX16MB2L182MOMS

Omron E2E-Next series M18 non-flush inductive proximity sensor, PNP normally-closed output, 16 mm nominal sensing distance, 10-30 V operating voltage, 2 m cable termination, IP67/IP67G/IP69K sealed.

$97.46 – $110.45Ref. price · indicative, final on quote
Omron E2EX16MB2L182MOMS datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

E2EX16MB2L182MOMS — Identification
ParameterValue
SeriesE2E-Next
E2EX16MB2L182MOMS — Sensing
ParameterValue
Sensing distance, max.16 mm
E2EX16MB2L182MOMS — Electrical
ParameterValue
Operating voltage, max.30 V
Operating voltage, min.10 V
Termination typeCable, 2 m
E2EX16MB2L182MOMS — Output
ParameterValue
Switching frequency400 Hz
Load current200 mA
E2EX16MB2L182MOMS — Mechanical
ParameterValue
Mounting typeNon Flush Mount
Length77.3 mm
Housing materialBrass Nickel Plated
E2EX16MB2L182MOMS — Environmental
ParameterValue
Operating temperature, max.85 °C
Operating temperature, min.-40 °C
IP protection ratingIP67;IP67G;IP69K
E2EX16MB2L182MOMS — Other specifications
ParameterValue
Construction formM18
Current consumption16 mA
Inductive sensor output typePNP, NC

Product details

Headline behaviour

The Omron E2EX16MB2L182MOMS is an E2E-Next M18 non-flush inductive proximity sensor with a PNP normally-closed output and a 2 m integral cable. Rated 16 mm nominal sensing distance with a 400 Hz switching frequency, the head can sustain high indexing rates on conveyor, indexing-drum and rotary-cam applications where inductive targets pass quickly. Loop runs on 10 to 30 V with 16 mA current draw; the PNP output sinks up to 200 mA into the load, which is enough headroom to drive a PLC sourcing input directly or a small relay coil without an interposing stage. Operating envelope covers -40 to 85 °C with IP67, IP67G and IP69K sealing, so the sensor is built for washdown cells, outdoor skids and oily-mist environments that would shorten the life of a standard IP67-only barrel.

Comparing the cable and M12 connector variants

The closest same-function sibling in the E2E-Next line is the E2EX16MB2L18M1OMS, which is identical electrically (PNP NC, 16 mm, 200 mA, IP67/IP69K, 10-30 V, -40 to 85 °C) but ships with an M12 4-pin connector and a 75 mm body length. That is the part to use when a panel was wired to an M12 drop; substituting the cable version into an M12-connector receptacle forces a re-termination, and substituting the connector version where the harness expects a flying lead forces a re-pin.

Sourcing posture

For a tender package, quote against the order code as written and request the official datasheet and declaration of conformity as supporting evidence; that paperwork is what answers compliance review without further clarification.

Buyer decision

For a sourcing buyer matching this MPN on a washdown line or outdoor skid, the IP69K rating and the -40 to 85 °C window are the fit-defining values; the PNP NC logic and the 200 mA output rating then drive the panel-side wiring decisions. Submit the order code against an RFQ and the line will be quoted to specification; the alternate M12 connector variant carries a different order code and should be substituted only when the wiring harness is being changed to match.

Frequently asked questions

When sourcing E2EX16MB2L182MOMS, what is the closest functional second source?

The closest functional sibling in the same E2E-Next M18 family is the E2EX16MB2L18M1OMS, which is identical electrically and in sealing class but is built around an M12 4-pin connector in place of the 2 m cable.

What is the listed length of E2EX16MB2L182MOMS?

Body length is 77.3 mm on the M18 housing, on a non-flush mount at the 16 mm sensing range.

What series is E2EX16MB2L182MOMS part of?

It belongs to the Omron E2E-Next series of cylindrical inductive sensors.

Will E2EX16MB2L182MOMS drop into a panel that was specified around E2EX16MB2L18M1OMS without rewiring?

No. The two parts share the same electrical ratings and sealing class, but one is terminated on a 2 m cable and the other on an M12 4-pin connector at a 75 mm body length, so the harness interface has to be matched, not assumed.

MPN
E2EX16MB2L182MOMS