Omron E2E-Next M18 inductive sensor, E2EX16MB3DL18M1OMS, PNP NO/NC, 16 mm sensing distance, 400 Hz, M12 4-pin, IP67/IP69K, 75 mm.
| Parameter | Value |
|---|---|
| Series | E2E-Next |
| Parameter | Value |
|---|---|
| Sensing distance, max. | 16 mm |
| Parameter | Value |
|---|---|
| Operating voltage, max. | 30 V |
| Operating voltage, min. | 10 V |
| Termination type | Connector, M12, 4-Pin |
| Parameter | Value |
|---|---|
| Switching frequency | 400 Hz |
| Load current | 100 mA |
| Parameter | Value |
|---|---|
| Mounting type | Non Flush Mount |
| Length | 75 mm |
| Housing material | Brass Nickel Plated |
| Parameter | Value |
|---|---|
| Operating temperature, max. | 85 °C |
| Operating temperature, min. | -40 °C |
| IP protection rating | IP67;IP69K |
| Parameter | Value |
|---|---|
| Construction form | M18 |
| Current consumption | 20 mA |
| Inductive sensor output type | PNP;NO/NC |
The E2EX16MB3DL18M1OMS: M18 inductive sensor from the E2E-Next series, rated for 16 mm sensing distance in a non-flush mount. Output is PNP with configurable NO/NC logic, switching at 400 Hz. The housing is brass nickel plated, sealed to IP67 and IP69K, so it holds up in washdown environments. The M12 4-pin connector makes for a quick swap if a cable version isn't preferred.
E2EX16MB3DL18M1OMS length is 75 mm; E2EX16MB3D18M1OMS length is 53 mm.
E2EX16MB3D18M1OMS is nearly identical except for length (53 mm vs 75 mm). Electrical specs match. Check panel clearance before substituting.
75 mm.
E2E-Next.
No related articles